6 Techniques To Give Your Plant Machinery More Years

Plant Machinery

Published on January 13th, 2022

Whether you manage a manufacturing plant or an office, the machinery you need to operate your business needs to be kept in excellent working order. If they aren’t well-maintained, the price of repairs and additional hardware will quickly span out of control.

Now, you might be wondering how you can maintain your plant machinery to last longer and serve you longer. In this article, we are going to tackle just that. We will be analyzing ways in which you can give your equipment a longer life. let’s jump right in!

  • Read The Instructions

Read the Instructions

There is no substitute for reading the handbook when it comes to understanding how to properly care for any piece of machinery.

You’ll understand all of the necessary routine maintenance activities and when they should be accomplished in this section. You’ll also learn if you can do the repairs yourselves or whether it has to be done by an expert.

Whether the new plant you want to maintain is as complex as a robotic arm, or something as minute as LED lighting for your robot’s training, you need to understand that it’s not everything that can be taken lightly. You need to know what is in your capacity to maintain and what isn’t.

  • Forbid Liquids Near Equipment

Forbid Liquids Near Equipment

When somebody spills their drinks on a machine, it causes a lot of unwanted machinery breakdowns. To overcome such issues, make it a policy that no one is allowed to bring alcohol or other potentially toxic substances near the worksite machinery.

While this may be harsh to some workers, ask them whether they want to compensate for the repairs the next time a drink spills on the equipment and renders it useless. Fluid damage to electrical equipment is particularly harmful.

Now, at times, fluids may get their way near the equipment regardless of how careful you are or stern you are with your employees. That is why you need to ensure that you invest in molecular sieve 3A.

It’s excellent in drying polar liquids such as ethanol. Let’s face the facts, who wouldn’t want to be prepared when something comes up? That’s right, no one!

  • Handle Machine With Caution

Handle Machine With Caution

It’s a common misconception that slapping or kicking a computer would improve its performance. While this may be true in some rare circumstances, hammering on machinery is more likely to cause harm than good.

The more you handle your machines as though they were delicate machinery, the longer they will last.

So, if most of your employees are not aware of how they should handle a certain machine, or how to treat it when it malfunctions, you need to train them.

This is because your goal is to have the machines serve you longer, rather than replacing them yearly or every couple of months.

  • Always Have Your Machine Properly Lubricated

Machine Properly Lubricated

While everybody understands that equipment needs to be oiled properly for best performance, it’s not always evident how failure to lubricate specific sections of a machine’s surface might cause issues.

Consider two metal surfaces that do not have any lubrication. They heat up when they scrape against one other.

This, in turn, can corrode the metal surfaces, rendering the equipment unworkable. Lubricants aid to minimize friction and prevent corrosion, keeping metal parts in good condition.

You do not need to worry about the kind of lubricant, there are tons of lubricants on the market that are quite efficient in performance.

All you need to do is to ensure that you get the right ones, and ensure that they are within your budget to avoid overspending.

It’ll be more beneficial for you if you could hire or allocate that job to specific personnel. You’ll not have to worry about whether they were lubricated or not, and if the latter is true, you’ll have the responsible party to deal with.

  • Do Not Muscle Wire

Wire ports can be found on many computers. These ports frequently have easily broken pins that are designed to fit into specific connector types.

When you change connector terminals in and out of equipment on a regular basis, you risk bending or damaging these pins. This isn’t just a costly fix; in some cases, you’ll have to replace the entire device.

  • Know Your Equipment


Make sure you and any other technicians understand how a piece performs and its functions before using it. If feasible, perform a trial run.

You must also be informed of the equipment’s age, estimated longevity, warranty claim, and any known problems and solutions.

This will guarantee that it is used properly to avoid breakages and ensure safety, and you will learn what to anticipate from it and what to do if it fails to achieve those goals.

Knowing your equipment also helps you understand what goes wrong and which part exactly needs tending.

The Bottom Line

Keep in mind that your plant’s machinery is your method of doing business. Your firm’s bottom line suffers when your equipment is down.

Make sure that all of the machinery in your firm is well-maintained to guarantee that they perform as they should. All the best!