Articles

How To Maintain And Treat Pool Water – Tips For Dummies

How to Maintain and Treat Pool Water – Tips for Dummies

Published on June 21st, 2021

Cleaning out your pool is something that we all need to get into the habit of doing. Those of us lucky enough to have our own pool can recognize how much of an investment it is in our property. It is only natural to protect your investment to the best of your ability. To do this, pool maintenance and treatment of water is essential.

Let’s talk about how we can maintain and treat pool water without having to get a university education to do so.

Pool Maintenance And Treatment Tips For Dummies

Don’t go buying a new pool before you read this first. If you already have a pool installed, familiarizing yourself with maintenance and treatment tips once in a while keeps you in good stead.

The Skim And Scrub

Pools need to be skimmed as often as you can. In Autumn, if you have a garden with trees in it, it needs to be skimmed daily or twice a day. This stops the leaves getting into the filter and clogging it up.

Similarly to skimming, you ought to scrub your pool out along the walls and floor. This keeps bacteria and algae to a minimum and should be done as often as you cam.

Regularly Test The pH

The CDC recommends using Chlorine and pH as the two main chemicals for keeping your pool clean. Natural pool water treatment is possible, but chlorine and pH regulation are the two most common ways to maintain and treat pool water at home.

Chlorine is similar to bleach. You should use it in the pool as often as is recommended on your pool manufacturers website, as is described on the side of the packet. The correct pH value for a swimming pool is between 7.4 and 7.6. This is neither acidic enough to hurt you, nor alkaline enough that germs breed.

Soda ash is used to raise a pH while bicarbonate of soda can lower it.

Keep The Water Moving

Keeping your pool water circulating is the ultimate way to protect it. When water stands still, it stagnates. Germs breed in it, critters make their way inside, and you end up with a gunky pool that nobody wants to swim in.

The key to avoiding this is to keep that pool water moving. Keep the pump running as much as you can. The ideal solution would be to keep the pump and filters on for 24 hours a day, but 12 or more does the trick.

Filters will catch any debris that your skimming misses, so be sure to keep your filters cleaned out. In addition, the pump should operate efficiently to keep that water moving. If it doesn’t, you might need to upgrade it.

Cleaning That Pool Filter

Cleaning out the pool filter is something that should become as routine as your skimming and scrubbing is. The filter has to be unclogged so that it can keep catching things, before they get into the air pump. If debris gets into that pump, you might end up having to replace it or repair it, both of which are costly.

Other Things To Remember About Pool Maintenance

Cleaning out the filter, skimming and scrubbing, and treating the water, are the top things you need to know about pool maintenance and treatment. Keep the following things in mind:

  • Pool Vacuum – using a pool vacuum makes the scrubbing easier.
  • Backwashing – backwashing gets the debris out of the filters so you can scoop it out.
  • Test and alter the water levels once a week.
  • Pool shock – use this concentrated chlorine on a cloudy pool.
  • Don’t let the water level drop too much.

If you can keep an eye on all these components, you can protect your pool investment for years to come.